Mega Scan Pro

• About the device:
• The new version of the Mega Scan Pro 2019 device is the latest and most advanced model in the world,
• With your new and advanced device, you will be able to search in vast and various lands and areas in a shorter time compared to traditional deployed devices and you will be able to set undetected targets with unexpected depths and distances very easy.
• Now with the legendary device Mega Scan Pro the user can detect gold, metals, treasures, spaces, and caves, as well as diamonds and gems up to an underground depths of 40 meters and an extent of front search range up to 2000 meters on the surface,
• The Mega Scan Pro device is easy to use according to the testimonial of the users of the device and its accuracy reaches up to 100% With the best suitable for all budgets price.
• The device operates on 10 long-term scanning programs, 2 magnetic measurement programs and the ionic scanning program with a total of 13 search programs in one electronic circuit provided in this device, which is the latest of all
• The device uses ARM processors and a 4.3 inch TFT color screen display.
• The Mega Scan Pro 2019 Features:
• The Mega Scan Pro 2019 features unique features that are only available in this device. The Mega Scan Pro is the first modern German device that combines three different search systems in one device to give you the ability to search all of the earth’s treasures including raw gold, metals, treasures, spaces, diamonds, etc.
• One or more search systems can be used also you can combine more than one system, to give you the best results
• The Mega Scan Pro search systems:
• The Long-range sensor system:
• The long-range sensor system is an ideal choice for prospectors and treasure hunters, giving impressive results, containing 10 detection programs, a depth of 40 meters underground and a front search range up to 2,000 meters on the surface.
  To use the sensor system, the device has to be installed as the following:
• The antennas had to be connected to the main unit of the device. And the user has to open the antennas to the maximum possible length.
• The antenna balance can be adjusted from the head of the antenna by rotating it from left to right until it gets the same height between the two antennas
• Then the user had to start the antennas operating through the operation button after selecting the language.
• Then he has to select a searching system from the screen.
• The sensor system in the Mega Scan Pro device has 10 search programs which are:
  1. The Buried Gold detection program
  2. The Row Gold detection program
  3. The Silver detection program
  4. The Iron detection program
  5. The Platinum detection program
  6. The Bronze detection program
  7. The Copper detection program
  8. The Gemstones detection program
  9. The Diamond detection program
  10. The Caves and spaces detection program
• After choosing the target, the software loading screen will appear followed by the search screen.
• The program name which has been selected by the user will appear with the table of distances and depths.
• The User can switch between the distances and depths through the top and bottom buttons.
• The exact frequency settings can be changed by pressing the bottom button until you hear a different tone and change the value via the Right and left button,
• The user can increase or decrease the frequency to 12 Hz, the rate increase 1 Hz per compression
• It is preferable to leave the exact frequency of the factory set at zero
• The Mega G3 device is characterized by the pre-search depth detecting system very easily before starting the actual search process with the device
• In addition the front range selection of the target detecting by choosing the distance of the front search to be detected accurately according to the area which is needed to be explored whether that area was a mountain or plain area or the valleys or any space within specific buildings.
• As shown in the following table:

Front-Range in meters		Depths in meters
Start from	Up to	Start from	Up to
Zero	250	Zero	5
Zero	500	Zero	10
zero	750	zero	15
Zero	1000	Zero	20
Zero	1500	Zero	30
Zero	2000	Zero	40

• Controlling the target with square selection style:
• This method enables the user to locate the target accurately and gives him a better ability to verify the target’s validity.
• The box around the target can be completed with a distance of 200 cm from the center of the target when the user is in the same line with the target and the antennas turn to target.
• The goal of all four aspects is otherwise that there is a possibility that the goal is not real
• A Very important note:
• When using the device to search for the following objectives: Diamonds, precious stones, and platinum
• The deep master unit should be planted into the ground and operated in any nearby random place to make sure that the targets are searched properly and effectively
• Measuring the target depth:
• At the highest point of the goal enter the nails or the pegs from the depth measuring unit about 8 cm in the ground then Adjust the exact frequency on five then Choose the program of the target from the main unit
• Wait three to four minutes Stand on the target and monitor the antennas which are turning to one side and that will be the first point of the signal
• After moving from the target point you will notice that the antennas will gradually move forward.
• Then Stop when the antennas turn back on one side and that will be the second point of the signal
• The approximate depth of the target is the distance between the two signal points
• And then at a distance of 45 degrees from the second signal point. The user had to conduct several measurements for measuring the depth more accurately, the digital voltmeter on the Deep master will show the electrical voltage of the battery
• The Ionic scanning system:
• How to Use the Ionic system:
• First, the user need to install the device Mini-Sensor and connect the installation rings, The He needs to choose the Ionic system from the selection systems list, and then the device will show the Ionic oscillations survey on the screen
• The ionic scanning system is used to detect ionic fields that are produced by long-buried underground metals. All metals have their own ionic fields, and that field effect increases by the increase of the period of the underground metal’s presence.
• And by the metal acquiring more electronics from the surrounding environment, these effects will be vary depending on the metal different ground factors in this region
• The ionic system is based on the scientific basis of the characteristics of the metal, its chemical composition and the metal rank in the periodic metal table. The ionic scanning system can capture signals from these ionic fields from long distances and can alert the user in case of approaching them
• The use and the Calibration of ionic scanner:
• When the device is turned on, please select the Ionic system from the system selection screen
• When starting the system, please re-set the system first by pressing the reset button on the scanner
• After finishing the calibration of the device, start to make some movements starting from the right and left and a few times up and down while walking holding the device,
• When the device detects a target it will issue a sound alert synchronous with an emergence of vibrations in the search screen
• and whenever that signals of the alarm sound and vibrations were increased on the search screen the near you are to the discovered target

The Ionic system can be used to search from different positions or f high or low areas, and it is never affected by the walking speed of the user

• The Magnetic measuring system:
• First, you need to install the Super Sensor of the measurement of terrestrial magnetic in the device, and then install the headphones to the device,
• After that you need to turn on the device and select the operating language then the screen will show the search system, you need to choose the magnetism measurement system by pressing the enter button
• when entering the system the device will indicate to The system is with colors automatically it is available to move to the system directly on the Magnetometer button to the right of the control panel
• Before you start the search you must reset the device by pressing the magnetometer button and you must also put the device vertically towards the ground, of course, this process must be done in a place free of metals. To verify the correctness of the work, you must press the reset button more than once until the device is idle and there are no signals or vibrations given by the device. And The indicator is at its lowest level. Then you can start checking the area you are looking for.
• This effective system in the Mega Pro Scan Pro gives more success to prospectors and treasure hunters As the User passes over the spaces or metals, the level of the signal on the screen will increase and he will also hear an increase in the sound vibrations directly. In this system, if the user was holding the device in a tilted way, not vertically, he could get the wrong results.
• the user also can increase or decrease the magnetic sensitivity according to the terrain conditions using the left and right arrows, and he can also control the speaker’s volume through the button on the speaker cable
• The Target Indicator:
• The targets are indicated by the signal lines to the top, If the signal was weak it means that the target is either small size or its buried far from the soil surface, but If the signal was strong, it means that the target is either close to the soil surface or that it is a large size target buried deep in the underground
• Note: Always check the accuracy of the target after the appearance of a signal on the screen, you must reset the device outside the target location, by long pressing the button in the far right of the control panel, and if repeated signal means that the target is real with a 100% percent

 

 

 

 

Available languages:

• The Mega Scan Pro device is being used all around the world that is why it has 8 operating languages available.
• The user can select one from the list when the device is turned on and the device works according to this language even after the shutdown and restart.

Languages available in the device are: German, English, Russian, French, Spanish, Persian, Turkish, and Arabic

Mega G3

• About the device:
• The Mega 3 new version 2019 is the latest release by Gold Master Global the exclusive agent of Mega Locators the leading German manufacturer in the field of gold and Metal Detectors
• An easy-to-use device that operates on two detecting systems, the long-range sensor, and Ionic systems with an affordable price that fits all prospectors budgets now you can get it only and exclusively through Gold Master Global
• The MEGA G3 device is the second generation of MEGA DETECTION technology, the best to discover treasures and precious metals such as gold, silver, and diamonds.
• This technology gives accurate results in the toughest terrain (rocks – mountains – deserts).
• In this new version of The Mega G3 Device comes with many new features and updates on the operating system of the device and the electronic radars and the device program to meet the needs and aspirations of the user who searches for gold and treasures
• Using Mega G3 you can search for natural gold veins, buried gold, antique gold treasures, and ancient natural silver up to an underground depth of 40 meters and the device give a carefully explored and amazing high results.
• The Mega G3 Features
• Mega G3 The new version is characterized by its ease of use, and its characteristics that qualify the user for gold and metal exploration
• The Mega G3 works effectively in all types of terrain and it is not affected at all by environmental factors such as rocks, mountains, and clay or rocky terrain
• The Device gives you quick and accurate responses, thanks to the German Technology that has provided the dive with High-quality electronic system and a unique practical design.
• The Search Systems of the new version of the MEGA G3 2019:
• The Long-range sensor system:
• The Mega G3 long-range sensor system is an ideal option for prospectors and treasure hunters where they can scan large and far areas in a short time in an easy and effortless manner.
• The device operates at a distance of 2000 meters on the surface level and underground depth of 40 meters. And it contains eight different scanning programs for gold and metal detection.
• To use the sensor system, the device has to be installed as the following:
• The antennas had to be connected to the main unit of the device. And the user has to open the antennas to the maximum possible length.
• The antenna balance can be adjusted from the head of the antenna by rotating it from left to right until it gets the same height between the two antennas
• Then the user had to start the antennas operating through the operation button after selecting the language.
• Then he has to select a searching system from the screen.
• The sensor system in the Mega G3 device has eight search programs which are:
  1. The Row Gold detection program
  2. The Gold Treasures detection Program
  3. The Silver detection program
  4. The Bronze detection program
  5. The Copper detection program
  6. The Gemstones detection program
  7. The Diamond detection program
  8. The Caves and spaces detection program

 

• Controlling the target with square selection style:
  This method enables the user to locate the target accurately and gives him a better ability to verify the target’s validity.
• The box around the target can be completed with a distance of 200 cm from the center of the target when the user is in the same line with the target and the antennas turn to target.
• The goal of all four aspects is otherwise that there is a possibility that the goal is not real
• A Very important note:
• When using the device to search for the following objectives: Diamonds, precious stones, and platinum
• The deep master unit should be planted into the ground and operated in any nearby random place to make sure that the targets are searched properly and effectively
• Measuring the target depth:
• At the highest point of the goal enter the nails or the pegs from the depth measuring unit about 8 cm in the ground then Adjust the exact frequency on five then Choose the program of the target from the main unit
• Wait three to four minutes Stand on the target and monitor the antennas which are turning to one side and that will be the first point of the signal,
• After moving from the target point you will notice that the antennas will gradually move forward.
• Then Stop when the antennas turn back on one side and that will be the second point of the signal,
• The approximate depth of the target is the distance between the two signal points
• And then at a distance of 45 degrees from the second signal point. The user had to conduct several measurements for measuring the depth more accurately, the digital voltmeter on the Deep master will show the electrical voltage of the battery
• After choosing the target, the software loading screen will appear followed by the search screen.
• The program name which has been selected by the user will appear with the table of distances and depths.
• The User can switch between the distances and depths through the top and bottom buttons.
• The exact frequency settings can be changed by pressing the bottom button until you hear a different tone and change the value via the Right and left button,
• The user can increase or decrease the frequency to 12 Hz, the rate increase 1 Hz per compression
• It is preferable to leave the exact frequency of the factory set at zero
• The Mega G3 device is characterized by the pre-search depth detecting system very easily before starting the actual search process with the device
• In addition the front range selection of the target detecting by choosing the distance of the front search to be detected accurately according to the area which is needed to be explored whether that area was a mountain or plain area or the valleys or any space within specific buildings.
• As shown in the following table:

Front-Range in meters		Depths in meters
Start from	Up to	Start from	Up to
Zero	250	Zero	5
Zero	500	Zero	10
zero	750	zero	15
Zero	1000	Zero	20
Zero	1500	Zero	30
Zero	2000	Zero	40

 

• The Ionic scanning system:
• How to Use the Ionic system:
• First, the user need to install the device Mini-Sensor and connect the installation rings, The He needs to choose the Ionic system from the selection systems list, and then the device will show the Ionic oscillations survey on the screen
• The ionic scanning system is used to detect ionic fields that are produced by long-buried underground metals. All metals have their own ionic fields, and that field effect increases by the increase of the period of the underground metal’s presence.
• And by the metal acquiring more electronics from the surrounding environment, these effects will be vary depending on the metal different ground factors in this region
• The ionic system is based on the scientific basis of the characteristics of the metal, its chemical composition and the metal rank in the periodic metal table. The ionic scanning system can capture signals from these ionic fields from long distances and can alert the user in case of approaching them
• The use and the Calibration of ionic scanner:
• When the device is turned on, please select the Ionic system from the system selection screen
• When starting the system, please re-set the system first by pressing the reset button on the scanner
• After finishing the calibration of the device, start to make some movements starting from the right and left and a few times up and down while walking holding the device,
• When the device detects a target it will issue a sound alert synchronous with an emergence of vibrations in the search screen
• and whenever that signals of the alarm sound and vibrations were increased on the search screen the near you are to the discovered target
• The Ionic system can be used to search from different positions or f high or low areas, and it is never affected by the walking speed of the user

 

Available languages

• The Mega G3 device is being used all around the world that is why it has 8 operating languages available.
• The user can select one from the list when the device is turned on and the device works according to this language even after the shutdown and restart.
• Languages available in the device are: German, English, Russian, French, Spanish, Persian, Turkish, and Arabic

Mega Gold

• About the device:
• The Mega Gold device is a Sensory system Gold Detector contains four detecting programs for rough gold, gold treasures, silver, and diamonds, it is a German device that has won the admiration and appreciation of many users as it has proved its effectiveness with all merit.
• The Mega Gold 2019 Device Features:
• The Mega Detection German factories have developed the new Mega Gold device, adding new features to be the most suitable for prospectors and treasure hunters to detect gold, gold treasures, old coins, statues, etc.
• Thanks to the long-range sensor system, now the user of the device can explore treasures and minerals for underground depths up to 30 meters And a front search range up to 2000 meters on the ground surface
• The Search Systems of the new version of the MEGA Gold 2019:
• The Mega Gold Device operates by the sensor system through 4 pre-programmed detecting programs to detect gold, buried gold treasures, silver, and diamonds.
• To use the sensor system, the device has to be installed as the following:
• The antennas had to be connected to the main unit of the device. And the user has to open the antennas to the maximum possible length.
• The antenna balance can be adjusted from the head of the antenna by rotating it from left to right until it gets the same height between the two antennas
• Then the user had to start the antennas operating through the operation button after selecting the language.
• Then he has to select a searching system from the screen.
• The sensor system in the Mega Gold device has four search programs which are:
  1. The buried Gold detection program
  2. The raw Gold detection Program
  3. The Silver detection program
  4. The Diamond detection program
• Controlling the target with square selection style:
• This method enables the user to locate the target accurately and gives him a better ability to verify the target’s validity.
• The box around the target can be completed with a distance of 200 cm from the center of the target when the user is in the same line with the target and the antennas turn to target.
• The goal of all four aspects is otherwise that there is a possibility that the goal is not real
• A Very important note:
• When using the device to search for the following objectives: Diamonds, precious stones, and platinum
• The deep master unit should be planted into the ground and operated in any nearby random place to make sure that the targets are searched properly and effectively
• Measuring the target depth:
• At the highest point of the goal enter the nails or the pegs from the depth measuring unit about 8 cm in the ground then Adjust the exact frequency on five then Choose the program of the target from the main unit
• Wait three to four minutes Stand on the target and monitor the antennas which are turning to one side and that will be the first point of the signal,
• After moving from the target point you will notice that the antennas will gradually move forward.
• Then Stop when the antennas turn back on one side and that will be the second point of the signal,
• The approximate depth of the target is the distance between the two signal points
• And then at a distance of 45 degrees from the second signal point. The user had to conduct several measurements for measuring the depth more accurately
• the digital voltmeter on the Deep master will show the electrical voltage of the battery and you will hear an increase in the sound vibrations directly.
• In this system, if the user holds the device in a tilted and not vertical way, he may get the wrong result. Therefore, the sensor should be kept vertically at 90 ° angle.
• The User can increase or decrease the magnetic sensitivity according to the terrain conditions using the left and right arrows, and he could also control the speaker’s volume through the button on the speaker cable
• The Target Indicator:
• The targets are indicated by the signal lines to the top, If the signal was weak it means that the target is either small size or its buried far from the soil surface, but If the signal was strong, it means that the target is either close to the soil surface or that it is a large size target buried deep in the underground
• Note: Always check the accuracy of the target after the appearance of a signal on the screen, You must reset the device outside the target location, by long pressing the button in the far right of the control panel, and if repeated signal means that the target is real with a 100% percent

 

Available languages

• The Mega Gold device is being used all around the world that is why it has 8 operating languages available.
• The user can select one from the list when the device is turned on and the device works according to this language even after the shutdown and restart.
• Languages available in the device are: German, English, Russian, French, Spanish, Persian, Turkish, and Arabic

Mega Diamond

• About The Device:
• The Mega Diamond Locator is the first device of its kind in the world to detect diamonds and gems using the long-range sensor system the latest advanced German technology reached by the Mega Locator company, the leading German in the manufacture of gold, metals and diamonds detectors
• The most important features of the Mega Diamond device is operating with the Sensor system with a front searching range that reaches up to 2,500 meters and a searching depth that penetrates the ground layers up to 60 meters
• This high-efficiency device contains 10 programs to detect all types of precious stones and diamonds
• The device is easy to use with high-quality materials in addition to 5 years guarantee from Gold Master global in cooperation with Mega locators company, we provide the best after-sales services.
• The Search ability of the Mega Diamond Locator Device:
• The Mega Diamond locator device uses a long-range sensor system with the following detection programs:
  • Diamond Program
  • Gems program
• It can scan the surface for a distance of 2,500 meters in front of the device user, and an underground depth of 60 meters, the entire device was made in Germany and it comes with 5 years warranty certificate
• The Mega Diamond locator 2019 Features:
• The Mega Diamond Detector is the best specially developed device for the detection of diamonds and precious stones and it features many technological features in terms of the search system, design, and the device software program
• The Mega Diamond Search System:
• The Long-Range sensor system:
• The MEGA Diamond Monitor is equipped with an advanced long-range sensor system specially designed for this device. It has a high-precision integrated technology to receive signals emitted by diamonds and gems via special search antennas with an enhanced signal booster to capture even the weakest underground signals
• The device operates at precise frequencies to determine the different types of gems buried in the ground and in different terrain and soils in different environments.
• Using this system in the device, the user can search for different types of gemstones and diamonds according to the following programs:
  • A Specialized diamond detecting program
  • A specialized gemstone detecting program which includes the following subprograms:

1. Emerald
2. Garnet
3. Red Sapphire
4. turquoise
5. Blue Sapphire
6. Tourmaline
7. Yellow Sapphire
8. Aquamarine
9. Quartz
10. Jasper

• How the device works:
• First Install the search antennas and then install the sensor device, then turn on the device and choose the appropriate language and then choose the system of long-range search, the list of search programs will appear:
• Diamond program
• Gems program
• Choose the program you want to search for.
• The Gemstone program contains the following objectives:

1. Emerald
2. Garnet
3. Red Sapphire
4. turquoise
5. Blue Sapphire
6. Tourmaline
7. Yellow Sapphire
8. Aquamarine
9. Quartz
10. Jasper

• The Searches is being conducted by selecting a specific search program from the Search menu and then the device will load the selected program and then the screen will display a graph with the range of search distance in the left side, and the search depth on the right side.
• For search range, users can choose one of these values: 250 – 500 – 750 – 1500 – 2000 – 2500 meters
• For the search depth they can specify any from the following values: 5 – 10 – 20 – 30 – 40 – 60 meters

 

Available languages

• The Mega Diamond device is being used all around the world that is why it has 8 operating languages available.
• The user can select one from the list when the device is turned on and the device works according to this language even after the shutdown and restart.

Languages available in the device are: German, English, Russian, French, Spanish, Persian, Turkish, and Arabic